streamyx WAN setting: vpi, vci, mtu, llc, vcc, mux, atm, mru, ppoa, ppoe, pvc
Streamyx wan setting adalah tetapan nilai2 tertentu bagi mendapatkan sambungan talian streamyx dari router yang bertindak sebagai modem. Router dalam mode bridge (jambatan), nilai2 dibawah boleh di abaikan. Dail-up streamyx melalui windows dail-up, memerlukan router berfungsi dalam mode bridge. In short: setting streamyx yang for-sure akan dapat sambungan bagi mode router-modem… nilai2 vpi, vci, mtu, llc, vcc, mux, atm, mru, ppoa, ppoe, pvc, dan sebagainya yang akan di update dari semasa ke semasa… stay tune…
| PORT / VPI / VCI: | 0 / 0 / 35 |
| Connection Type: | PPPoE |
| Service Name: | pppoe_0_0_35_1 |
| Service Category: | UBR |
| IP Address: | Automatically Assigned |
| Service State: | Enabled |
| NAT: | Enabled |
| Firewall: | Enabled |
| IGMP Multicast: | Enabled |
| Quality Of Service: | Disabled |
…
| Line Rate – Upstream (Kbps): | xxx |
| Line Rate – Downstream (Kbps): | xxxx |
| LAN IP Address: | xxx.xxx.xxx.xxx |
| Default Gateway: | 219.93.218.177 |
| Primary DNS Server: | 202.188.0.133 |
| Secondary DNS Server: | 202.188.1.5 |
…. More advance …
MTU : 1400 bytes
MRU : 1492 bytes
Default Route: Disable
PPPoE Pass Through: Disable
PVC : Pvc0
Connection Type: PPPoE / LLC
Authentication Type: Auto / PAP
IP Control: Dynamic IP.
Leave a Reply
3101 views, 6 so far
today |












